[FFmpeg-devel] [PATCH V4] avcodec/libvpxenc: add VP8 support for ROI-based encoding

Guo, Yejun yejun.guo at intel.com
Fri Mar 8 22:57:12 EET 2019


Signed-off-by: Guo, Yejun <yejun.guo at intel.com>
---
 libavcodec/libvpxenc.c | 150 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 150 insertions(+)

diff --git a/libavcodec/libvpxenc.c b/libavcodec/libvpxenc.c
index c823b8a..2984c7a 100644
--- a/libavcodec/libvpxenc.c
+++ b/libavcodec/libvpxenc.c
@@ -1057,6 +1057,153 @@ static int queue_frames(AVCodecContext *avctx, AVPacket *pkt_out)
     return size;
 }
 
+static int vp8_encode_set_roi(AVCodecContext *avctx, const AVFrame *frame)
+{
+    /* range of vpx_roi_map_t.delta_q[i] is [-63, 63] */
+#define MAX_DELTA_Q 63
+
+    const AVRegionOfInterest *roi = NULL;
+    vpx_roi_map_t roi_map;
+    int ret = 0;
+    int nb_rois;
+    AVFrameSideData *sd = av_frame_get_side_data(frame, AV_FRAME_DATA_REGIONS_OF_INTEREST);
+    VPxContext *ctx = avctx->priv_data;
+    vpx_active_map_t active_map = { 0 };
+    int max_segment_cnt = 4;    /* VP8 ROI only support 4 segments. */
+    int segment_id = 0;
+
+    /* record the mapping from delta_q to "segment id + 1".
+     * delta_q is shift with MAX_DELTA_Q, and so the range is [0, 2*MAX_DELTA_Q].
+     * add 1 to segment id, so no mapping if the value of array element is zero.
+     */
+    int segment_mapping[2 * MAX_DELTA_Q + 1] = { 0 };
+
+    /* segment id 0 in roi_map is reserved for the areas not covered by AVRegionOfInterest.
+     * segment id 0 in roi_map is also for the areas with AVRegionOfInterest.qoffset near 0.
+     */
+    segment_mapping[MAX_DELTA_Q] = segment_id + 1;
+    segment_id++;
+
+    active_map.rows = (frame->height + 15) / 16;
+    active_map.cols = (frame->width  + 15) / 16;
+
+    if (!sd) {
+        /* For the case that some middle frames do not have ROI while other frames have ROIs.
+         * Due to libvpx behavior, we have to reset VP8E_SET_ACTIVEMAP, otherwise the previous
+         * ROIs continue working for frames without ROIs.
+         */
+        if (vpx_codec_control(&ctx->encoder, VP8E_SET_ACTIVEMAP, &active_map)) {
+            log_encoder_error(avctx, "Failed to set VP8E_SET_ACTIVEMAP codec control.\n");
+            return AVERROR_INVALIDDATA;
+        }
+        return 0;
+    }
+
+    memset(&roi_map, 0, sizeof(roi_map));
+    roi_map.rows = active_map.rows;
+    roi_map.cols = active_map.cols;
+    roi_map.roi_map = av_mallocz(roi_map.rows * roi_map.cols);
+    if (!roi_map.roi_map) {
+        av_log(avctx, AV_LOG_ERROR, "roi_map alloc failed.\n");
+        ret = AVERROR(ENOMEM);
+        goto fail;
+    }
+
+    active_map.active_map = av_malloc(active_map.rows * active_map.cols);
+    if (!active_map.active_map) {
+        av_log(avctx, AV_LOG_ERROR, "active_map alloc failed.\n");
+        ret = AVERROR(ENOMEM);
+        goto fail;
+    }
+    /* set 1 to enable the corresponding element of vpx_roi_map_t.roi_map. */
+    memset(active_map.active_map, 1, active_map.rows * active_map.cols);
+
+    roi = (const AVRegionOfInterest*)sd->data;
+    if (!roi->self_size || sd->size % roi->self_size != 0) {
+        av_log(ctx, AV_LOG_ERROR, "Invalid AVRegionOfInterest.self_size.\n");
+        ret = AVERROR(EINVAL);
+        goto fail;
+    }
+    nb_rois = sd->size / roi->self_size;
+
+    /* This list must be iterated from zero because regions are
+     * defined in order of decreasing importance. So discard less
+     * important areas if they exceed the segment count.
+     */
+    for (int i = 0; i < nb_rois; i++) {
+        int qoffset;
+        int mapping_index;
+
+        roi = (const AVRegionOfInterest*)(sd->data + roi->self_size * i);
+        if (roi->qoffset.den == 0) {
+            av_log(ctx, AV_LOG_ERROR, "AVRegionOfInterest.qoffset.den must not be zero.\n");
+            ret = AVERROR(EINVAL);
+            goto fail;
+        }
+
+        qoffset = (int)(roi->qoffset.num * 1.0f / roi->qoffset.den * MAX_DELTA_Q);
+        qoffset = av_clip(qoffset, -MAX_DELTA_Q, MAX_DELTA_Q);
+
+        mapping_index = qoffset + MAX_DELTA_Q;
+        if (!segment_mapping[mapping_index]) {
+            if (segment_id > max_segment_cnt - 1) {
+                av_log(ctx, AV_LOG_WARNING,
+                       "ROI only supports %d segments (and segment 0 is reserved for non-ROIs), skipping this one.\n",
+                       max_segment_cnt);
+                roi = (AVRegionOfInterest*)((char*)roi + roi->self_size);
+                continue;
+            }
+
+            segment_mapping[mapping_index] = segment_id + 1;
+            roi_map.delta_q[segment_id] = qoffset;
+            segment_id++;
+        }
+    }
+
+    /* This list must be iterated in reverse, so for the case that
+     * two regions overlapping, the more important area takes effect.
+     */
+    for (int i = nb_rois - 1; i >= 0; i--) {
+        int qoffset;
+        int mapping_value;
+        int starty, endy, startx, endx;
+
+        roi = (const AVRegionOfInterest*)(sd->data + roi->self_size * i);
+
+        starty = FFMIN(roi_map.rows, roi->top / 16);
+        endy   = FFMIN(roi_map.rows, (roi->bottom + 15) / 16);
+        startx = FFMIN(roi_map.cols, roi->left / 16);
+        endx   = FFMIN(roi_map.cols, (roi->right + 15) / 16);
+
+        qoffset = (int)(roi->qoffset.num * 1.0f / roi->qoffset.den * MAX_DELTA_Q);
+        qoffset = av_clip(qoffset, -MAX_DELTA_Q, MAX_DELTA_Q);
+
+        mapping_value = segment_mapping[qoffset + MAX_DELTA_Q];
+        if (mapping_value) {
+            for (int y = starty; y < endy; y++)
+                for (int x = startx; x < endx; x++)
+                    roi_map.roi_map[x + y * roi_map.cols] = mapping_value - 1;
+        }
+    }
+
+    if (vpx_codec_control(&ctx->encoder, VP8E_SET_ROI_MAP, &roi_map)) {
+        log_encoder_error(avctx, "Failed to set VP8E_SET_ROI_MAP codec control.\n");
+        ret = AVERROR_INVALIDDATA;
+        goto fail;
+    }
+
+    if (vpx_codec_control(&ctx->encoder, VP8E_SET_ACTIVEMAP, &active_map)) {
+        log_encoder_error(avctx, "Failed to set VP8E_SET_ACTIVEMAP codec control.\n");
+        ret = AVERROR_INVALIDDATA;
+        goto fail;
+    }
+
+fail:
+    av_freep(&active_map.active_map);
+    av_freep(&roi_map.roi_map);
+    return ret;
+}
+
 static int vpx_encode(AVCodecContext *avctx, AVPacket *pkt,
                       const AVFrame *frame, int *got_packet)
 {
@@ -1113,6 +1260,9 @@ static int vpx_encode(AVCodecContext *avctx, AVPacket *pkt,
                 flags |= strtoul(en->value, NULL, 10);
             }
         }
+
+        if (avctx->codec_id == AV_CODEC_ID_VP8)
+            vp8_encode_set_roi(avctx, frame);
     }
 
     res = vpx_codec_encode(&ctx->encoder, rawimg, timestamp,
-- 
2.7.4



More information about the ffmpeg-devel mailing list