Encoding
[Encoding/Decoding Library]


Data Structures

struct  RcOverride

Defines

#define FF_MIN_BUFFER_SIZE   16384
 minimum encoding buffer size Used to avoid some checks during header writing.

Enumerations

enum  Motion_Est_ID {
  ME_ZERO = 1, ME_FULL, ME_LOG, ME_PHODS,
  ME_EPZS, ME_X1, ME_HEX, ME_UMH,
  ME_ITER, ME_TESA
}
 motion estimation type. More...

Functions

AVCodecavcodec_find_encoder (enum CodecID id)
 Find a registered encoder with a matching codec ID.
AVCodecavcodec_find_encoder_by_name (const char *name)
 Find a registered encoder with the specified name.
int attribute_deprecated avcodec_encode_audio (AVCodecContext *avctx, uint8_t *buf, int buf_size, const short *samples)
 Encode an audio frame from samples into buf.
int avcodec_encode_audio2 (AVCodecContext *avctx, AVPacket *avpkt, const AVFrame *frame, int *got_packet_ptr)
 Encode a frame of audio.
attribute_deprecated int avcodec_encode_video (AVCodecContext *avctx, uint8_t *buf, int buf_size, const AVFrame *pict)
int avcodec_encode_video2 (AVCodecContext *avctx, AVPacket *avpkt, const AVFrame *frame, int *got_packet_ptr)
 Encode a frame of video.
int avcodec_encode_subtitle (AVCodecContext *avctx, uint8_t *buf, int buf_size, const AVSubtitle *sub)

Define Documentation

#define FF_MIN_BUFFER_SIZE   16384

minimum encoding buffer size Used to avoid some checks during header writing.

Definition at line 465 of file avcodec.h.

Referenced by avcodec_encode_video(), encode_frame(), encode_nals(), encode_picture_lossless(), encode_picture_ls(), flashsv2_encode_frame(), gif_encode_frame(), prores_encode_frame(), svq1_encode_frame(), and xvid_encode_frame().


Enumeration Type Documentation

motion estimation type.

Enumerator:
ME_ZERO  no search, that is use 0,0 vector whenever one is needed
ME_FULL 
ME_LOG 
ME_PHODS 
ME_EPZS  enhanced predictive zonal search
ME_X1  reserved for experiments
ME_HEX  hexagon based search
ME_UMH  uneven multi-hexagon search
ME_ITER  iterative search
ME_TESA  transformed exhaustive search algorithm

Definition at line 472 of file avcodec.h.


Function Documentation

int attribute_deprecated avcodec_encode_audio ( AVCodecContext avctx,
uint8_t buf,
int  buf_size,
const short *  samples 
)

Encode an audio frame from samples into buf.

Deprecated:
Use avcodec_encode_audio2 instead.
Note:
The output buffer should be at least FF_MIN_BUFFER_SIZE bytes large. However, for codecs with avctx->frame_size equal to 0 (e.g. PCM) the user will know how much space is needed because it depends on the value passed in buf_size as described below. In that case a lower value can be used.
Parameters:
avctx the codec context
[out] buf the output buffer
[in] buf_size the output buffer size
[in] samples the input buffer containing the samples The number of samples read from this buffer is frame_size*channels, both of which are defined in avctx. For codecs which have avctx->frame_size equal to 0 (e.g. PCM) the number of samples read from samples is equal to: buf_size * 8 / (avctx->channels * av_get_bits_per_sample(avctx->codec_id)) This also implies that av_get_bits_per_sample() must not return 0 for these codecs.
Returns:
On error a negative value is returned, on success zero or the number of bytes used to encode the data read from the input buffer.

Definition at line 1172 of file utils.c.

Referenced by audio_encode_example().

int avcodec_encode_audio2 ( AVCodecContext avctx,
AVPacket avpkt,
const AVFrame frame,
int *  got_packet_ptr 
)

Encode a frame of audio.

Takes input samples from frame and writes the next output packet, if available, to avpkt. The output packet does not necessarily contain data for the most recent frame, as encoders can delay, split, and combine input frames internally as needed.

Parameters:
avctx codec context
avpkt output AVPacket. The user can supply an output buffer by setting avpkt->data and avpkt->size prior to calling the function, but if the size of the user-provided data is not large enough, encoding will fail. All other AVPacket fields will be reset by the encoder using av_init_packet(). If avpkt->data is NULL, the encoder will allocate it. The encoder will set avpkt->size to the size of the output packet.
If this function fails or produces no output, avpkt will be freed using av_free_packet() (i.e. avpkt->destruct will be called to free the user supplied buffer).
Parameters:
[in] frame AVFrame containing the raw audio data to be encoded. May be NULL when flushing an encoder that has the CODEC_CAP_DELAY capability set. If CODEC_CAP_VARIABLE_FRAME_SIZE is set, then each frame can have any number of samples. If it is not set, frame->nb_samples must be equal to avctx->frame_size for all frames except the last. The final frame may be smaller than avctx->frame_size.
[out] got_packet_ptr This field is set to 1 by libavcodec if the output packet is non-empty, and to 0 if it is empty. If the function returns an error, the packet can be assumed to be invalid, and the value of got_packet_ptr is undefined and should not be used.
Returns:
0 on success, negative error code on failure

Definition at line 1050 of file utils.c.

Referenced by avcodec_encode_audio(), do_audio_out(), flush_encoders(), wrap(), and write_audio_frame().

int avcodec_encode_subtitle ( AVCodecContext avctx,
uint8_t buf,
int  buf_size,
const AVSubtitle sub 
)

Definition at line 1351 of file utils.c.

Referenced by do_subtitle_out(), and wrap().

attribute_deprecated int avcodec_encode_video ( AVCodecContext avctx,
uint8_t buf,
int  buf_size,
const AVFrame pict 
)

Deprecated:
use avcodec_encode_video2() instead.
Encode a video frame from pict into buf. The input picture should be stored using a specific format, namely avctx.pix_fmt.

Parameters:
avctx the codec context
[out] buf the output buffer for the bitstream of encoded frame
[in] buf_size the size of the output buffer in bytes
[in] pict the input picture to encode
Returns:
On error a negative value is returned, on success zero or the number of bytes used from the output buffer.

Definition at line 1249 of file utils.c.

Referenced by estimate_best_b_count(), filter(), video_encode_example(), wrap(), and write_video_frame().

int avcodec_encode_video2 ( AVCodecContext avctx,
AVPacket avpkt,
const AVFrame frame,
int *  got_packet_ptr 
)

Encode a frame of video.

Takes input raw video data from frame and writes the next output packet, if available, to avpkt. The output packet does not necessarily contain data for the most recent frame, as encoders can delay and reorder input frames internally as needed.

Parameters:
avctx codec context
avpkt output AVPacket. The user can supply an output buffer by setting avpkt->data and avpkt->size prior to calling the function, but if the size of the user-provided data is not large enough, encoding will fail. All other AVPacket fields will be reset by the encoder using av_init_packet(). If avpkt->data is NULL, the encoder will allocate it. The encoder will set avpkt->size to the size of the output packet. The returned data (if any) belongs to the caller, he is responsible for freeing it.
If this function fails or produces no output, avpkt will be freed using av_free_packet() (i.e. avpkt->destruct will be called to free the user supplied buffer).
Parameters:
[in] frame AVFrame containing the raw video data to be encoded. May be NULL when flushing an encoder that has the CODEC_CAP_DELAY capability set.
[out] got_packet_ptr This field is set to 1 by libavcodec if the output packet is non-empty, and to 0 if it is empty. If the function returns an error, the packet can be assumed to be invalid, and the value of got_packet_ptr is undefined and should not be used.
Returns:
0 on success, negative error code on failure

Definition at line 1283 of file utils.c.

Referenced by avcodec_encode_video(), do_video_out(), and flush_encoders().

AVCodec* avcodec_find_encoder ( enum CodecID  id  ) 

Find a registered encoder with a matching codec ID.

Parameters:
id CodecID of the requested encoder
Returns:
An encoder if one was found, NULL otherwise.

Definition at line 1692 of file utils.c.

Referenced by add_audio_stream(), add_video_stream(), asf_write_header1(), assert_codec_experimental(), audio_encode_example(), avcodec_get_name(), avcodec_get_type(), avcodec_string(), choose_encoder(), compute_status(), config(), estimate_best_b_count(), ffserver_opt_preset(), list_formats(), read_ffserver_streams(), transcode_init(), and video_encode_example().

AVCodec* avcodec_find_encoder_by_name ( const char *  name  ) 

Find a registered encoder with the specified name.

Parameters:
name name of the requested encoder
Returns:
An encoder if one was found, NULL otherwise.

Definition at line 1709 of file utils.c.

Referenced by find_codec_or_die(), opt_audio_codec(), and opt_video_codec().


Generated on Fri Oct 26 02:48:03 2012 for FFmpeg by  doxygen 1.5.8